Compact Multi-Angle Tungsten Electrode Sharpener for TIG Welding

From the brand 3mirrors Tungsten Sharpeners

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool w/Multi-Angle& Offsets, Diamond Wheels &Rods& Instructions

Kind Reminder: 3mirrors Brand is the original designer of the tungsten electrode grinding controllers, we know the products and welders, and we are always improving, so you can see that we have several grinders with different angles so far. Various counterfeit products are constantly appearing on the market. Watch out! They do not understand the tools and the design is inaccurate. Please confirm our brand 3mirrors before buying. Thank you!

3mirrors Tungsten Sharpeners - Visit the Store Welding Helmet Fasteners - Visit the Store

Tungsten electrodes of varying diameters are typically used in conventional welding procedures practiced in a wide variety of industries. During such procedures, an arc is established between the metal to be welded and the end, or point, of each electrode. The electrode point becomes worn or damaged over time, resulting in inadequate or interrupted current transmission. As the quality and efficiency of welds are highly dependent upon the condition of the electrode point, it is important that the point be dressed, or reshaped and sharpened, as needed during welding operations.

We produced the latest tungsten needle grinding tool to make grinding more simple and more convenient!

Comparison of the first generation and the second generation Tungsten Electrode Grinder Head Sharpener features: Angle: The tip angle is more precise than the previous generation. Grinding angle problem: In addition to the angle of the needle tip, there is also a director of the grinding mark on the surface of the tip. This state is perfect when the tungsten needle is projected vertically on the grinding wheel, that is when the tungsten needle is parallel to the tangent line. Grinding wheel utilization: The first generation of four contacts are on the same ring; the second generation of dispersion distribution uses as much as possible of all corundum. Material: The first generation is plastic, (plastic is soft and easy to thread & melt at high temperatures, not recommended); The second generation is aluminum alloy, which is sturdy and durable. Installation problem: The new model does not need to adjust the position of the grinding wheel repeatedly. The middle cut-out design only leaves two columns, which can be installed in one step, and the grinding wheel is aligned with the slit, and the position is accurate.

PS： Our product is a Tungsten Electrode Grinder Head, you can buy a rotating tool for use yourself.

Our package includes 1X Grinder Head, 4X Copper Screw Holes, 5X 25mm Double side Diamond Wheels, 2X CNC Mandrels, 1x Instruction manual, 1X Packing Box

INSTALLATION Illustration: 1) Unscrew the top collar on Rotary Tool, and choose the correct size collet for the 1/8" mandrel. 2) Install the Angle Controller as shown in Picture-1. 3) Connect the mandrel with the Diamond wheel, and set it in your rotary tool. As Picture-2. 4) Adjust the height of the diamond wheel. Screw the collet when you are sure the Below of the Long window is on the same PLANE as the top face of the diamond wheel. As Picture-3. 5) Always wear Eye Protection, Respiratory Protection, and Protective clothing when using the Angles Controller and when welding.

There are also instructions attached. Use this tungsten grinder head angle controller to maximize welding performance. Grinding wheels should be made of small granularity diamond or borazon. Grind longitudinally and concentrically so that the lines on the ground surface move in the same direction as the length of the tungsten electrode and the electrode has no flat spots. Compared with some other big grinders, their traces may be relatively straight, but the grinding angle is not accurate enough. The tungsten needle tip has a concave arc and can't be carried around, expensive; Our grinder head is that the traces may be slightly curved(Quite slight, and it's an unavoidable problem with grinding on rotating objects), but the angle is accurate, the weight is light, easy to carry and use, and cost-effective.

4 Holes w/Screws ALUMINUM Tungsten Electrode Sharpener- Special Edition 24 Holes w/Dust Housing ALUMINUM Tungsten Electrode Sharpener- Healthy Edition 12 Holes Multi-Angle ALUMINUM Tungsten Electrode Sharpener- Starter Edition 4 Holes w/Screws ALUMINUM Tungsten Electrode Sharpener and Rotary Tool 24 Holes w/Dust Housing ALUMINUM Tungsten Electrode Sharpener and Rotary Tool 12 Holes Multi-Angle ALUMINUM Tungsten Electrode Sharpener and Rotary Tool

See Details | Add to Cart

Customer Reviews 4.3 out of 5 stars 465 4.4 out of 5 stars 158 4.3 out of 5 stars 617 4.0 out of 5 stars 139 4.2 out of 5 stars 272 4.2 out of 5 stars 272

Price $35.19 $68.79 $36.98 $99.99 $119.99 $63.99

Aluminum Made ✓ ✓ ✓ ✓ ✓ ✓

Offset Angles 10°, 15°, 20°, 22.5° 15°, 18°, 22.5°, 30° 15°, 20°, 15°, 20° 10°, 15°, 20°, 22.5° 15°, 18°, 22.5°, 30° 15°, 20°, 15°, 20°

Grinding Wheel Size & Number 25mm x 5 35mm x 5 25mm x 5 25mm x 5 35mm x 5 25mm x 5

With Rotary Tool x x x ✓ ✓ ✓

Features With 4 brass tungsten guide rails With a Dust Housing to keep healthy work Simple and easy to use is most popular With 4 brass tungsten guide rails With a Dust Housing to keep healthy work Simple and easy to use is most popular

This is one of our most popular Tungsten Electrode Sharpener controllers, for TIG Welding and grinding 4 types size tungsten needles, choose it if you are the first time to use. The Tungsten grinder body is upgraded aluminum alloy material, and professional 3D CNC finishing, Durable with no trouble with high-temperature melting. The Brass Guides and Mandrels are also CNC machined with higher accuracy and will be more durable. The new mandrel swing less when grinding, Easy Application.

The grinder head fits Black and Decker, Milwaukee, Bosch Dremel and More Rotary Tools with a 3/4-12 thread! (Package No Rotary Tools Included). The tool is Light and portable, simple and quick, it takes less than 30s to sharpen a tungsten needle w/ a perfect angle tip, more convenient than those cumbersome grinding machines on your tig desktop. Help you improve efficiency.

The Tungsten Electrode Sharpener comes with 4 Brass Tungsten Guide Screws: 040", 1/16", 3/32" and 1/8" (1mm, 1.6mm, 2.4mm, 3.2mm). The guides ensure concentricity and multi-offset. Increase the utilization of the grinding wheels. When grinding, the position of the copper screw can be exchanged to obtain your desired angles of the tungsten needle. The kit extras come with 1 small storage bag(To prevent scratches and wear), 5x 25mm Double-Sided Grind Wheels, and 2 CNC Mandrels(Service longer).

A tungsten grinding tool has 4 angled holes. 22.5°, 20°, 15° and 10° (45°, 40°, 30°, 20° Tips Angle respectively). Precise control support grinds more perfectly tungsten angle tips. All holes are designed to touch the same height as the diamond wheel, no need to set repeatedly. The open design allows the grinding wheel to be easily installed and aligned. The sharpening tool also has tungsten cut-off port processing, which can cut the used balled electrodes for re-insert and grinding.

Wearing a mask and other protective gear is recommended unless you are grinding in a full-sealed space. We are the original brand and have been working on this tool for many years, knowing what our users want and constantly improving it. Please note that the 3mirrors Brand is the Original Design. The appearance can be imitated but the core data and the exact angles cannot. For your convenience, please avoid purchasing piracy. Any questions, please contact us for professional help!

product information: